Free Cutting & Stainless Steel

STANGEN 6KANT1 Fotolia 116565896 M

Bars

  • Execution : drawn | straightened | polished | chamfered ends | cracks tested
  • Dimension range: round from 1.00 mm to 80 mm | Tolerances starting from  ISO 6 | ground  from ISO 5
    Square bars from SW 2.50 mm | Tolerances from ISO 9
    Hexagonal bars from SW 2.50 mm | Tolerances from ISO 9
    Profiles on request

Coils

  • Execution : drawn Tolerances from ISO 6
  • Dimension range: from 1.0 mm to 10.0 mm

Free cutting steel according to DIN 1651

EN Material No. C % Si % Mn % P % S % Pb % Other
11SMn30 1.0715 ≤ 0.14 ≤ 0.05 0.90-1.30 ≤ 0.11 0.27-0.33 0  
11SMn37 1.0736 ≤ 0.14 ≤ 0.05 1.00-1.50 ≤ 0.11 0.34-0.40 0.20-0.35  
11SMnPb30 1.0718 ≤ 0.14 ≤ 0.05 0.90-1.30 ≤ 0.11 0.27-0.33 0.20-0.35  
11SMnPb37 1.0737 ≤ 0.14 ≤ 0.05 1.00-1.50 ≤ 0.11 0.34-0.40 0.20-0.35  
11SMnPb30 Te ~1.0718 ≤ 0.14 ≤ 0.05 0.90-1.30 ≤ 0.11 0.27-0.33 0.20-0.35 Te 0.03-0.06
11SMnPb30 TeBi ~1.0718 ≤ 0.14 ≤ 0.05 0.90-1.30 ≤ 0.11 0.27-0.33 0.20-0.35 Te - Bi
11SMnPb37 Bi ~1.0737 ≤ 0.14 ≤ 0.05 1.00-1.50 ≤ 0.11 0.34-0.40 0.20-0.35 Bi 0.05-0.09

Case Hardening and Tempering Steel

EN Material No. C % Si % Mn % P % S % Pb %  Cr% Other 
10S20 1.0721 0.07-0.13 0.01-0.40 0.07-1.10 ≤ 0.06 0.15-0.25 0    
10SPb20 1.0722 0.07-0.13 0.00-0.40 0.07-1.10 ≤ 0.06 0.15-0.25 0.20-0.35    
35S20 1.0726 0.32-0.39 0.00-0.40 0.07-1.10 ≤ 0.06 0.15-0.25 0    
35SPb20 1.0756 0.32-0.39 0.00-0.40 0.07-1.10 ≤ 0.06 0.15-0.25 0.15-0.35    
45S20 1.0727 0.42-0.50 0.00-0.40 0.07-1.10 ≤ 0.06 0.15-0.25 0    
45SPb20 1.0757 0.42-0.50 0.00-0.40 0.07-1.10 ≤ 0.06 0.15-0.25 0.15-0.35    
60S20 1.0727 0.57-0.65 0.10-0.30 0.07-1.10 ≤ 0.06 0.18-0.25 0    
60SPb20 1.0758 0.57-0.65 0.10-0.30 0.07-1.10 ≤ 0.06 0.18-0.25 0.15-0.35    
SWT60Pb ~1.0758 0.60-0.69  0.10-0.30  0.70-1.35  0.02-0.06  0.18-0.25  0.15-0.35  0.15-0.25  Bi 

Roller bearing steel

Designation Material No. C% Si% Mn% P% S% Cr% Ni% Other
100Cr6 1.3505 0.90-1.05 0.15-0.35 0.25-0.45  ≤ 0.03  ≤ 0.035 1.35-1.65  ≤ 0.03 Cu>0.30

Alloy Steel

DIN = EN: Material No. C% Si% Mn% P% S% Pb% Cr% Mo%
16MnCrS5 1.7139 0.14-0.19 ≤ 0.40 1.00-1.30 ≤ 0.035 0.02-0.04 0 0.80-1.10  
16MnCrS5Pb ~ 1.7142 0.14-0.19 ≤ 0.40 1.00-1.30 ≤ 0.035 0.02-0.035 0.20-0.35 0.80-1.10  
42CrMo4 1.7225 0.38-0.45 ≤ 0.40 0.60-0.90 ≤ 0.035 ≤ 0.035 0 0.90-1.20 0.15-0.30

Unalloyed Structural Steel

EN / DIN Material No. C% Si% Mn% P% S% Pb% Cr% Mo% Ni%
C15 1.0401 0.12-0.18  ≤ 0.40 0.30-0.60  ≤ 0.045  ≤ 0.045        
C25Pb 1.0403 0.12-0.18  ≤ 0.40  0.30-0.60   ≤ 0.045  ≤ 0.045 

 0.15-0.30

      
 C35  1.0501 0.32-0.39  ≤ 0.40  0.50-0.80  ≤ 0.045   ≤ 0.045  - ≤ 0.40 ≤ 0.10 ≤ 0.40
 C35Pb  1.0502 0.32-0.39   ≤ 0.40  0.50-0.80  ≤ 0.045 ≤ 0.045  0.15-0.30  ≤ 0.40 ≤ 0.10 ≤ 0.40
 C45  1.0503 0.42-0.50   ≤ 0.40 0.50-0.80   ≤ 0.045 ≤ 0.045  -   ≤ 0.40 ≤ 0.10  ≤ 0.40 
 C45Pb  1.0504 0.42-0.50  ≤ 0.40  0.50-0.80   ≤ 0.045 ≤ 0.045   0.15-0.30 ≤ 0.40  ≤ 0.10  ≤ 0.40 
 C60  1.0601 0.57-0.65  ≤ 0.40  0.60-0.90   ≤ 0.045 ≤ 0.045  -   ≤ 0.40  ≤ 0.10 ≤ 0.40 
 C60Pb  1.0602 0.57-0.65  ≤ 0.40  0.60-0.90   ≤ 0.045  ≤ 0.045  0.15-0.30  ≤ 0.40  ≤ 0.10 ≤ 0.40 

Stainless Steel

EN / DIN Material No. C% Si% Mn% P% S% Cr% Mo% Ni% Other
X20Cr13 1.4021 0.17-0.25 ≤ 1.0 ≤ 1.0 ≤ 0.045 max 0.030

12.0-14.0

      
X46Cr13 1.4034 0.43 - 0.50 ≤ 1.0 ≤ 1.0 ≤ 0.040 ≤ 0.015 12.5 - 14.5      
X46CrS13 1.4035 (1.4034+S) 0.43-0.50 ≤ 1.0  ≤ 2.0  ≤ 0.040  0.15-0.35  12.5 - 14.5       
X14CrMoS17 1.4104 0.10-0.17  ≤ 1.0 ≤ 1.50  ≤ 0.060  0.15-0.35 15.5-17.5 0.20-0.60    
X90CrMoV18  1.4112  0.85 - 0.95  ≤ 1.0 ≤ 1.0  ≤ 0.040  ≤ 0.015  17.0 - 19.0   0.90 - 1.30    V: 0.07-0.12 
X5CrNi18-10 1.4301 ≤ 0.07 ≤ 1.0 ≤ 2.0 ≤ 0.045 ≤ 0.030 17.0-19.5   8.0-10.5 N : ≤ 0.11
X8CrNiS18-9 1.4305 ≤ 0.10 ≤ 1.0 ≤ 2.0 ≤ 0.045 0.15-0.35 17.0-19.0   8.0-10.0  
X10CrNi18-8  1.4310 ≤ 0.12  ≤ 1.50  ≤ 2.00  ≤0.045  ≤ 0.015  16.0 - 18.0  ≤ 0.80 

6.0 - 9.0 

  
X5CrNiMo17-13-3 1.4435  ≤ 0.03 ≤ 1.0  ≤ 2.0  ≤ 0.045  ≤ 0.025  17.0 - 18.5  2.5 - 3.0  12.5 - 15.0   
X6CrNiCuS18-9-2 1.4570 (1.4305+Cu) ≤ 0.08  ≤ 1.0  ≤ 2.0  ≤ 0.045  0.15 - 0.35  17.0 - 19.0  ≤ 0.60   8.0 - 10.0 Cu : 1.40-1.80 
X6CrNiMoTi17-12-2 1.4571  ≤ 0.08 ≤ 1.0  ≤ 2.0  ≤ 0.045  ≤ 0.030  16.5 - 18.5  2.0 - 2.5  10.5 - 13.5   
X22CrMoV12-1 1.4923  0.18 - 0.24 ≤ 0.50 0.40 - 0.90  ≤ 0.025  ≤ 0.015  11.0 - 12.5  0.8 - 1.2  0.30 - 0.80   

Company

  • Durofer AG
    Moosstrasse 20
    9014 St. Gallen

Contact

Warehouse Metals

  • Durofer AG
    Niedermattstrasse 3e
    Riverside / Halle 330
    4528 Zuchwil

Warehouse Chemicals

  • Hausamann Lagerhaus AG
    Bahnhofstrasse 1
    8560 Märstetten

Terms